Changing a Labyrinth Filter
Changing the filters on a Purex Fume Extractor is a simple process providing the correct procedure is followed.
WARNING: Before Changing Filters...
-
Always turn the unit off and disconnect the unit from the electricity supply.
-
Always wear the gloves and mask provided when changing filters.
-
Protective eyewear should also be worn.
-
Always use the correct form of manual handling as filters may be heavy.
-
Always dispose of used filters in accordance with local regulations.
|
Labyrinth Pre-filter Removal: Example used - Purex Alpha 400 |
|
|
Turn the top door lock 180 degrees counter clockwise. |
 |
|
Turn the bottom door lock 180 degrees counter clockwise and open the door. |
 |
| Take hold of the filter inlet section. |  |
| Slide the filter off the air inlet. |  |
|
Place the used filter in the bag provided and tie the top using the tie wrap provided. To fit a new filter use the procedure above in reverse. |
 |
| Used filters should be disposed of in accordance with local authority regulations. The company and its agents disclaim all liability and responsibility for any harm, damage, contamination or injury caused by inappropriate handling or use of filters or unlawful disposal. | |
