• Home
• LEV Testing
• About
• Fume Extraction
• Applications
• Products
• News
• Support

Changing the filters on a Purex Fume Extractor is a simple process providing the correct procedure is followed.

WARNING: Before Changing Filters...

• Always turn the unit off and disconnect the unit from the electricity supply.
• Always wear the gloves and mask provided when changing filters.
• Protective eyewear should also be worn.
• Always use the correct form of manual handling as filters may be heavy.
• Always dispose of used filters in accordance with local regulations.

Main Filter Removal: Example used - Purex Alpha 400
Turn the top door lock 180 degrees counter clockwise.
Turn the bottom door lock 180 degrees counter clockwise and open the door.
Turn the filter locking handle 180 degrees clockwise, the filter will drop down in the cradle.
Gradually pull the filter by a short distance out of the machine but do not let it tip forward.
Remove the filter from the machine. Important: Always use the correct form of manual handling as filters may be heavy. More than one person may be required. Do not lift the filter by using the handle on the front.
Place the used filter in the bag provided and tie the top using the tie wrap provided. To fit a new filter use the procedure above in reverse. When inserting a new main filter ensure that the "Airflow Direction" arrow is pointing upwards.
Used filters should be disposed of in accordance with local authority regulations. The company and its agents disclaim all liability and responsibility for any harm, damage, contamination or injury caused by inappropriate handling or use of filters or unlawful disposal.